ND-91285-001(E)
DECEMBER, 1999
Page 347
Revision 1.0
(1/2)
STATION HUNTING - CIRCULAR
GENERAL DESCRIPTION
When a busy station in a hunt group is called, this service feature permits a call to be processed auto-
matically through the hunt group in a preprogrammed order from that station’s position within the hunt
group.
STATION APPLICATION
All stations
OPERATING PROCEDURE
No manual operation is required.
SERVICE CONDITIONS
1. When all stations within a STATION HUNTING - CIRCULAR group are busy, the calling party will
receive Busy Tone.
2. Assignment of station numbers to a STATION HUNTING - CIRCULAR group may be in any numer-
ical order.
3. Calls to any programmed station in a STATION HUNTING - CIRCULAR group will, when the station
is busy, proceed through all other programmed stations entered subsequently in the hunt group, until
reaching the last.
4. If a hunt group station has set CALL FORWARDING - ALL CALLS or DO NOT DISTURB, hunting
will bypass that station and continue in the order of hunting.
5. The maximum number of stations per hunting group is 60. (include secretary Hunting)
6. There is no limit to the number of STATION HUNTING - CIRCULAR groups within the system.
7. STATION HUNTING is activated first rather than CALL FORWARDING - BUSY LINE, if the dialled
station has set this feature and all stations in the hunting group are busy.
8. The terminating sequence of service features to a station is as follows:
a. CALL FORWARDING - ALL CALLS
b. STATION HUNTING
c. CALL FORWARDING - BUSY LINE
d. CAMP-ON
e. CALL WAITING - STATION.
9. In a STATION HUNTING - CIRCULAR group, any number of stations can be designated as secretar-
ial stations. When all stations in the STATION HUNTING - CIRCULAR group are busy, the system
will reroute a call initiated to the secretarial station to a preassigned STATION HUNTING - SECRE-
TARIAL group. All stations within the STATION HUNTING - CIRCULAR group can be assigned
the same station as an entry to the STATION HUNTING - SECRETARIAL group.
Summary of Contents for NEAX 2000
