NEC NEAX 2000, Programming Manual

Page: 699 / 1200

MESSAGE WAITING
– 679 –
A2679-10
MESSAGE WAITING
PROGRAMMING
To provide the Message Waiting from an administrative station, Front Desk Terminal, Hotel Con-
sole, or PMS:
DESCRIPTION DATA
Assign the Service Restriction Class A for
Message Waiting to required guest or ad-
ministrative station as shown below.
•
(1)
(2)
Y=02
X-XXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Message Waiting in the Service Re-
striction Class A assigned by CM12 Y=02.
•
•
(1)
(2)
Y=24 Administrative station allowing
Message Waiting set/reset to
guest room
Y=40 Guest Station
00-15: Service Restriction Class A as-
signed by CM12 Y=02
0 : Restricted
1 : Allow
Provide each station with Message Wait-
ing Service (D
term
or Single Line Tele-
phone with Message Waiting Lamp).
•
(1)
(2)
Y=03
X-XXXX: Station No.
0: To provide
Specify guest station or administrative
station to each station.
NOTE:
CM13 Y=13 data assignment is
not required when Message
Waiting is set by PMS.
•
(1)
(2)
Y=13
X-XXXX: Station No.
0 : Administrative station
1 : Guest station
Assign access code for Message Waiting
Set/Reset/Retrieve from administrative
station, if required.
NOTE:
CM20 Y=0-3 data assignment is
not required when Message
Waiting is set by PMS.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A040: MW Lamp Control-Set
A041: MW Lamp Control-Reset
A147: MW Retrieve
CM13
START
CM12
CM15
CM20
Administrative station
GUEST/ADMINISTRATIVE
0
Guest station w/o MW
CM15
Y=40
CM15
Y=24
Lamp
Guest station with MW
Lamp
0
0 1
1 0
A