NEC NEAX 2000, Programming Manual

Page: 868 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 86
Revision 1.0
(1/1)
CALL HOLD - D
term
GENERAL DESCRIPTION
This service feature permits a D
term
station user to hold a call in progress by utilizing CALL HOLD.
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
To hold a call in progress without using the
Hold
key:
1. Depress
Transfer
key; receive Special Dial Tone.
2. Dial CALL HOLD code; receive Dial Tone.
3. Call in progress is held; the user may initiate a new call.
To release a new call and return to original call:
1. Go on-hook, releasing new call.
2. Original call rings back to D
term
.
To hold a new call and return to original call:
1. Depress
Transfer
key; receive Special Dial Tone.
2. Dial CALL HOLD code; new call is now held, original call is automatically returned.
Note:
By repeating the above steps, D
term
users may alternately converse with two parties.
A feature/line key may be programmed as a
Hold
key:
1. While a call is in progress, depress the
Hold
key.
2. The call is placed on hold and Dial Tone is restored.
3. A new call may be dialled.
4. Depress the
Hold
key again to return to the original call.
SERVICE CONDITIONS
1. Refer to CALL HOLD.