NEC NEAX 2000, Programming Manual

Page: 129 / 1200

CALL INFORMATION SYSTEM (CIS)
PROGRAMMING
AP Initialization
– 109 –
A2107-10
Example:
Where: SC-AAAA VBB.BB-CC
AAAA : Software Name
BB.BB : Software Version
CC
: Nation Code
DESCRIPTION DATA
Load the initial data into the AP00 card. (1)
(2) 0000
CCC
On the AP00 card, set SW1 switch as
shown below: NOTE: SW1-4 should be set as fol-
lows;
ON : AP No. 04-15
OFF: AP No. 20-31
Initial the AP (Up and DOWN the MB switch). The message shown on Example will be print-
ed. Station number information is transferred from the MP to the AP. With the transfer com-
pleted, message “SORT COMPLETE” is printed out on the printer. (It takes about 4 min. for
the message printout of “SORT COMPLETE” after “AP00 START” message.)
CMD101
END
A
AP OFF LINE
4
3
2
1
SW 1
ON
: POSITION TO BE SET
1999 8/30 14:02 MON **** AP00 START **** SC-2397 V00. 02 -00