NEC NEAX 2000, Programming Manual

Page: 1163 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 381
Revision 1.0
(1/1)
TRUNK TO TRUNK TRANSFER BEFORE ANSWER
BY ATTENDANT CONSOLE
GENERAL DESCRIPTION
This feature allows an Attendant to transfer an incoming or outgoing call on one trunk to an outgoing
trunk, and exit the connection before the called party answers.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
1. An incoming call is received and answered in the normal manner. The trunk number is displayed.
2. The Attendant dials the access code of the outgoing route then the destination number. The dialed dig-
its are displayed.
3. If the feature is allowed, the display will change to show the selected outgoing trunk number.
4. The call is extended (by operation of the
RELEASE
key). The Attendant Console will be recalled. On
answer, the Attendant will be connected to the original trunk party. If the call is answered, the Trunk -
to - Trunk connection is maintained.
5. After recall to the Attendant Console, the called party may answer which would result in an initial 3-
way conversation before the call is extended.
Alternatively the Attendant can re-extend the call (from above) to the same destination or extend it to
other.
SERVICE CONDITIONS
l. The feature is dependent on trunk supervision and other conditions being met.
2. The trunk associated with at least one side of the call must be programmed for answer and/or release
supervision to ensure that the trunks do not lock up or this feature will be disabled.