NEC NEAX 2000, Programming Manual

Page: 974 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 192
Revision 1.0
(1/1)
INTER-POSITION CALLING
GENERAL DESCRIPTION
This feature allows an Attendant to directly converse with another Attendant in systems where MULTI-
PLE CONSOLE OPERATION is provided.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
To place a call from Console-A to Console-B:
1. Operator-A depresses an idle LOOP key.
2. Operator-A dials Inter-Position Calling/Transfer access code and Operator-B’s identification
number.
3. Call is indicated at Console-B (on ANS key or TRF key).
4. Operator-B depresses ANS key or TRF key.
5. Operator-A converses with Operator-B.
6. Operator-A and B depress
RLS keys.
SERVICE CONDITIONS
1. Each console is assigned an identification number to allow INTER-POSITION CALLING or TRANS-
FER.
2. An Attendant can receive only one INTER-POSITION CALLING or TRANSFER at one time.
3. After receiving an INTER-POSITION TRANSFER, the operator has full capabilities for redirecting
the call.
4. When ATTENDANT CONSOLE LOCKOUT (at the called console) or NIGHT SERVICE is effective,
INTER-POSITION CALLING or TRANSFER will result in the Reorder Tone.