NEC NEAX 2000, Programming Manual

Page: 1052 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 270
Revision 1.0
(1/1)
PASSING DIAL TONE
GENERAL DESCRIPTION
This service feature allows the Attendant to pass Dial Tone to a restricted station user, enabling that
user to place a call from which he/she would normally be restricted.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
1. Restricted station user dials Attendant.
2. Attendant depresses
ANSWER or ATND key; station number is displayed.
3. Obtain details.
4. Dial C.O. access code; trunk identification number is displayed.
5. Depress
RELEASE key.
SERVICE CONDITIONS
1. This feature permits passing of Dial Tone to restricted stations only by the Attendant.
2. When LEAST COST ROUTING - 3/6 DIGIT is provided in the system, the Attendant cannot pass Dial
Tone. The call must be completed via the Attendant Console.
3. The Attendant cannot pass Dial Tone to a station whose route restriction class is such that it cannot
receive incoming calls.
4. The PASSING DIAL TONE feature is limited by the number of trunks that can be accessed by the
Attendant and the class of service restrictions of the station.
5. RESTRICTION FROM OUTGOING CALLS: This feature cannot be overridden by the use of the
PASSING DIAL TONE feature.
6. The Attendant is allowed to pass Dial Tone to any station that has a class of service which allows nor-
mal direct dial access capabilities to the trunk group seized by the Attendant.
7. Any non-restricted station can dial through over the selected outgoing trunk. The type of address sig-
nals sent to the called location are determined by the trunk route class data.
8. Where STATION MESSAGE DETAIL RECORDING (SMDR) is provided, passing dial tone calls are
charged to the calling station line.