NEC NEAX 2000, Programming Manual

Page: 1116 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 334
Revision 1.0
(1/2)
SPLIT CALL FORWARDING - DON’T ANSWER
GENERAL DESCRIPTION
This feature reroutes internal calls and external calls, to stations which do not answer, to different des-
tinations indiviually.
STATION APPLICATION
All stations.
OPERATING PROCEDURE
To activate SPLIT CALL FORWARDING feature, both SPLIT CALL FORWARDING and CALL FOR-
WARDING settings are required.
For CALL FORWARDING setting, refer to CALL FORWARDING - DON’T ANSWER feature.
From a D
term
with an LCD:
To set SPLIT CALL FORWARDING - DON’T ANSWER:
1. Lift the handset or press
Speaker
key; receive Dial Tone.
2. Press the SPLIT CALL FORWARDING - DON’T ANSWER feature access key; receive Spe-
cial Dial Tone.
3. Dial the desired destination number (0-9); receive Service Set Tone.
DESTINATION NUMBER
0 : Target Station for SPLIT CALL FORWARDING - DON’T ANSWER (Block No.0)
1 :
(Block No.1)
2 : (Block No.2)
3 : (Block No.3)
4 : (Block No.4)
5 : (Block No.5)
6 : (Block No.6)
7 : Target Station for SPLIT CALL FORWARDING - DON’T ANSWER (Block No.7)
8 : Target Station for CALL FORWARDING - DON’T ANSWER
9 : SPEED CALLING - STATION
Note: Destination No. 0-7 is pre-assigned in system programming.
The LCD displays “
SET xxxx
” (where
xxxx
is Target Station)
4. Replace the handset or press
Speaker
key.
To cancel SPLIT CALL FORWARDING - DON’T ANSWER:
1. Lift the handset or press
Speaker
key; receive Dial Tone.
2. Press the SPLIT CALL FORWARDING - DON’T ANSWER feature access key; receive Spe-
cial Dial Tone. Press the
*
key, the associated LED goes out; receive Service Set Tone.
The LCD displays “
CANCEL
”.
From a Single Line Telephone:
To set SPLIT CALL FORWARDING - DON’T ANSWER:
1. Lift the handset; receive Dial Tone.
2. Dial the SPLIT CALL FORWARDING - DON’T ANSWER feature access code; receive Spe-
cial Dial Tone.