NEC NEAX 2000, Programming Manual

Page: 152 / 1200

CALL PARK-SYSTEM
– 132 –
A2131-10
CALL PARK-SYSTEM
PROGRAMMING
HARDWARE REQUIRED
D
term
and DLC card as required
DESCRIPTION DATA
Specify whether a trunk placed on consul-
tation hold by Call Park-System can be re-
trieved by pressing a trunk line
appearance key on a D
term
.
(1)
(2) 133
0 : Not available
1 : Available
Assign Service Restriction Class C to
each station.
•
(1)
(2)
Y=07
X-XXXXXXXX: Station No.
00-15 : Service Restriction Class C
Assign type of D
term
to Service Restriction
Class C assigned by CM12 Y=07.
•
(1)
(2)
Y=96
00-15: Service Restriction Class C
assigned by CM12 Y=07
1 : With LCD
Assign an access code for Call Park-Sys-
tem set and retrieve.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A008: Call Park-System Set
A009: Call Park-System Retrieve
Specify the recall timing for the Call Park-
System.
•
(1)
(2)
Y=0
05
01-98: 4 sec.-392 sec.
(4 sec. increments)
99 : Recall is not performed
If no data is set, the default setting is 60-64
sec.
Assign a Call Park-System function key to
the D
term
, if required.
•
(1)
(2)
Y=00
My Line No. +
+ Key No.
F5000
Assign a Call Park-System function key to
ATTCON/DESKCON, if required.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) +
+ Key
No.
F6144: Call Park key
START
END
CM08
CM12
CM15
CM20
CM41
CM90
,
,