NEC NEAX 2000, Programming Manual

Page: 327 / 1200

MAINTENANCE ADMINISTRATION TERMINAL (MAT)
– 307 –
A2298-10
NOTE:
If the Password Service is provided, enter a password predetermined by CM03 before
programming from the MAT.
•
+ 03 + + Password Level No. (0-7) + + Pa
-“OK” will be displayed, if accepted.
-“DATA ERROR” will be displayed if the password is incorrect.
HARDWARE REQUIRED
Refer to MATWorX Installation Guide.
DESCRIPTION DATA
Assign a password to each Password Lev-
el. (1)
(2) 0-7: Password Level 0-7
X-X...X: Max.8 digits Password Code
A password code for Password Level 7
should be assigned in advance because of
providing the password service by
CME9>9.
The following passwords are not available.
“CCCCCCCC”
“FFFFFFFF”
Provide the system with Password Fea-
ture. After setting this data, access to sys-
tem programming is only available with
password entry. (1)
(2) 9
0: Provided
END
CME9
A
ST DE DE EXE