NEC NEAX 2000, Programming Manual

Page: 1007 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 225
Revision 1.0
(1/1)
MESSAGE WAITING LAMP SETTING - ATTENDANT
GENERAL DESCRIPTION
This service feature enables the Attendant to initiate MESSAGE WAITING (MW) indications to sta-
tion users. A special lamp fitted to Single Line Telephone or that of any D
term
assigned function key, are
used for the purpose. Indications once set, can be subsequently cancelled at any time.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
Without Prerecorded Message:
To set MW Indication:
1. Depress idle LOOP key
2. Dial MW Set code
3. Dial station number; receive Service Set Tone
4. MW indication is set
5. Depress
RELEASE
to return to idle condition
To cancel MW Indication:
1. Depress idle
LOOP
key
2. Dial MW Cancel code
3. Dial station number; receive Service Set Tone
4. MW indication is cancelled
5. Depress
RELEASE
to return to idle condition
SERVICE CONDITIONS
1. MW status is displayed by the MW Lamp on Single Line Telephone or D
term
.
2. MW can be automatically cleared by talking to the Attendant or the setting station. If MW is not auto-
matically cleared, the reset operation is required.
3. The LC card for MW is required to provide Single Line Telephones with the MW function. Single
Line Telephones must be equipped with MW lamps for 70VDC.
4. The MW lamping on the D
term
is selected on a system-wide basis for flashing at 60IPM or lit steady.
5. For MW applications with Digital Announcement Trunk (DAT), please refer to the Features and Spec-
ifications of VOICE MESSAGE SYSTEM.