NEC NEAX 2000, Programming Manual

Page: 478 / 1200

SPLIT CALL FORWARDING-ALL CALLS
– 458 –
A2452-10
DESCRIPTION DATA
Specify the setting method for Call For-
warding-All Calls-Outside. (1)
(2) 222
0 : The feature is set when the station
goes on hook/when receiving Ser-
vice Set Tone (ORT time out)
1 : The feature is set when receiving
Service Set Tone (ORT time out)
Assign whether or not an extension can
set Split Call Forwarding-All Calls-Outside
by entering only a trunk access code. (1)
(2) 386
0 : Restricted
1 : Allow
Assign whether or not the system should
check the trunk restriction class of the for-
warded station during a Split Call Forward-
ing-All Calls-Outside. (1)
(2) 387
0 : Follow trunk restriction class
1 : No check
Assign Call Forwarding-All Calls keys to
the D
term
s, as required.
•
(1)
(2)
Y=00
My Line No. +
+ Key No.
F0010: Call Forwarding-All Calls Set/
Cancel
Assign Split Call Forwarding-All Calls keys
to the D
term
s, as required.
(1)
(2) My Line No. + + Key No.
F0A80: Split Call Forwarding-All Calls
Set/Cancel
Select the feature available in each tenant
when an internal call and a Tie Line/C.O.
incoming call is terminated.
•
•
•
(1)
(2)
Y=23
Internal Call or ATT assisted Call
Y=24 C.O. Incoming Call
Y=25 Tie Line Incoming Call
00-63: Tenant No.
0 : Split Call Forwarding
1 : Call Forwarding
Assign the destination of Split Call For-
warding.
NOTE
(1)
(2)
XX Y
XX: 00-63: Tenant No.
Y : 0-7: Block No.
X-XX +
+ YY···Y:
X-XX : Trunk Access Code
(1-2 digits)
YY···Y: Called No. (Max. 26 digits)
X-XXXXXXXX: Station No. (1-8 digits)
CM65
CM08
A
CM78
CM90
B
,
,
,