NEC NEAX 2000, Programming Manual

Page: 449 / 1200

SINGLE DIGIT STATION CALLING WITH TIMING
– 429 –
A2425-10
SINGLE DIGIT STATION CALLING WITH TIMING
PROGRAMMING
DESCRIPTION DATA
Assign the single digit access code for the
required features.
For example, to provide the system with
the following numbering plan:
1X: Service Feature Access
2XX: Station Numbers
3XX: Station Numbers
4XX: Station Numbers
8X: Trunk Route Access
9: C.O. Outgoing Access
0: Operator Call
1-8: Single Digit Station Numbers
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X: Single Digit Access Code 0-9, A (#),
B (*)
A047 : TAS Answer A
A048 : TAS Answer B
A049 : TAS Answer C
A050 : TAS Answer D
A051 : TAS Answer E
100-163: Trunk Route 00-63
200-231: Route Advance Block 00-31
800
: Operator Call
801 : Single Digit Station No.
PROGRAMMING
(1) Assign digit 1 through 8 to the Single
Digit Station No. (Data=801) respec-
tively.
And assign the other access code by
CM20.
(2) Assign the station numbers (2XX,
3XX, 4XX, 1-9) to required LEN by
CM10.
If the different digit station numbers of the
same level are required within a system,
set the leading one or two digit to the data
for the required combination of station
numbering plan.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XX: Leading one or two digits of sta-
tion No.
823: 2-3 digits Station No.
824: 2-4 digits Station No.
825: 2-5 digits Station No.
826: 2-6 digits Station No.
827: 2-7 digits Station No.
828: 2-8 digits Station No.
START
CM21
A
CM20