NEC NEAX 2000, Programming Manual

Page: 857 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 75
Revision 1.0
(1/2)
CALL FORWARDING - DON’T ANSWER
GENERAL DESCRIPTION
This service feature permits a call to an unanswered station to be forwarded to a predesignated station,
or to the Attendant, when the called station does not answer after a predetermined time interval.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To set from an individual station:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - DON’T ANSWER access code; receive Special Dial Tone.
3. Dial the desired target station number; receive Service Set Tone.
To cancel from an individual station:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - DON’T ANSWER cancellation code; receive Service Set Tone.
To set from an Attendant Console:
1. Press an idle
LOOP
key.
2. Dial the CALL FORWARDING - DON’T ANSWER access code; receive Special Dial Tone.
3. Dial the originating station number.
4. Dial the desired target station number; receive Service Set Tone.
To cancel from an Attendant Console:
1. Press an idle
LOOP
key.
2. Dial the CALL FORWARDING - DON’T ANSWER cancellation code; receive Special Dial Tone.
3. Dial the originating station number; receive Service Set Tone.
SERVICE CONDITIONS
1. This feature may be set and cancelled by either the station user or the Attendant.
2. When the attendant extends a call to a station which has set CALL FORWARDING - DON’T
ANSWER, the called station will ring for a programmed period.
3. If desired, the predetermined time interval can be changed via the VARIABLE TIMING PARAME-
TERS feature.
4. Stations are assigned this feature according to CLASS OF SERVICE - INDIVIDUAL programming in
system data.
5. There is no limitation to the number of stations which can set CALL FORWARDING - DON’T
ANSWER simultaneously.