NEC NEAX 2000, Programming Manual

Page: 282 / 1200

FORCED ACCOUNT CODE
– 262 –
A2260-10
FORCED ACCOUNT CODE
PROGRAMMING
There are two kind of processor for Forced Account Code. One is MP, the other is AP01.
For MP, EXPMEM card can be used to expand the number of codes.
(1) With MP card
DESCRIPTION DATA
Designate the processor for Forced Ac-
count Code as MP card. (1)
(2) 216
0: MP card
Specify whether Service Set Tone is pro-
vided after dialing the access code for
Forced Account Code. (1)
(2) 362
0 : No tone
1 : Service Set Tone
Assign the Service Restriction Class A for
Forced Account Code to required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Forced Account Code in the Service
Restriction Class A assigned by CM12
Y=02.
•
(1)
(2)
Y=31
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Forced Ac-
count Code.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A087
Specify the maximum number of digits for
Forced Account Code. (1)
(2) 12
01-16
: 1 digit-16 digits
NONE : 16 digits
START
CM08
CM15
CM20
CM12
A
CM42