NEC NEAX 2000, Programming Manual

Page: 1120 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 338
Revision 1.0
(1/1)
STACK DIAL - ATTENDANT
GENERAL DESCRIPTION
This feature enables the Attendant to remember the numbers dialled in the preceding five calls, includ-
ing the last number dialled. the stack dial numbers are sequentially displayed on the LCD of theAttendant
Console, thus allowing the Attendant to make an outgoing call by selecting the desired dialled number
from the display on the LCD.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
1. Press the
LNR
key. The caller hears Special Dial Tone, and the number dialled last is displayed on the
LCD.
2. To display the numbers dialled before the last call, press the
LNR
key again. While the caller receives
Special Dial Tone, the number dialled before the last call is displayed on the LCD.
(Each time the
LNR
key is pressed, the numbers dialled for the last five calls are displayed sequen-
tially from the last number dialled.)
3. To redial the displayed number on the LCD, press the
#
key. The following is displayed on the
SMART CONSOLE:
SERVICE CONDITIONS
1. Refer to STACK DIAL - D
term
.
RDL[• •] - 1 10:23 AM TUE 20
00238241554