NEC NEAX 2000, Programming Manual

Page: 1134 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 352
Revision 1.0
(1/2)
STATION LINE STATUS DISPLAY
GENERAL DESCRIPTION
This feature allows line status of Single Line Telephones and D
term
s to be displayed on the MAINTE-
NANCE ADMINISTRATION TERMINAL (MAT), for the detection of faulty lines dunning regular test-
ing or after complaints.
STATION APPLICATION
Not applicable
OPERATING PROCEDURE
Refer to the Maintenance Manual.
SERVICE CONDITIONS
l. This feature is effective during on-line status only.
2. For Single Line Telephones, this feature affect the operating status of the stations accommodated in the
same LC card as the station to be displayed. Therefore, it is recommended that this feature is per-
formed after complaints or problems should occur.
3. Printout of station line status is not available through the printer connected to the MAT.
4. Station line status is displayed in numerical data.
The numerical data represents the status from both hardware and software aspects. Following shows
the numeral data displayed and their corresponding status:
• Hardware Status
Displayed Data Status (Single Line Telephone) Status (D
term
)
00 Terminal is not connected Terminal is not connected
OR
B - wire is grounded
01 Terminal is connected Terminal is connected
02 Circuit is looped Short Circuit
OR
Short Circuit
03 A - wire is grounded A - wire is grounded
04 LC card is not mounted DLC card is not mounted
05 Test Busy Terminal Failure
06 - DLC Card Down
08 - Line Failure