NEC NEAX 2000, Programming Manual

Page: 1186 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 404
Revision 1.0
(2/4)
VOICE MESSAGE SYSTEM (CONT’D)
OPERATING PROCEDURE (CONT’D)
To cancel VOICE MESSAGE WAITING - System to an individual station:
1. Lift the handset and receive Dial Tone.
2. Dial the Voice Message Waiting - System cancel access code.
3. Dial the station number and receive Service Set Tone.
4. Restore the handset.
To retrieve a message from a Single Line Telephone:
1. Lift the handset and receive Dial Tone.
2. Dial the Voice Message Waiting - System retrieve access code.
3. Listen to the message.
4. Restore the handset.
To retrieve a message from a D
term
:
1. Depress the
Speaker
key or lift the handset and receive Dial Tone.
2. Depress the
MSG
key.
3. Listen to the message.
4. Depress the
Speaker
key or restore the handset.
Voice Message Waiting - Individual
To set:
1. Lift the handset and receive Dial Tone.
2. Dial the Voice Message Waiting - Individual set access code and receive Special Dial Tone.
3. Dial the desired station number and receive Service Set Tone for 3 seconds.
4. Record the message.
5. Restore the handset.
To cancel:
1. Lift the handset and receive Dial Tone.
2. Dial the Voice Message Waiting - Individual cancel access code and receive Special Dial Tone.
3. Dial the desired station number and receive Service Set Tone.
4. Restore the handset.
To set Voice Message Waiting - Individual while receiving Ringback Tone or Busy Tone or performing
voice call:
From a Single Line Telephone:
1. Dial “8” (or depress the hookswitch and dial “8” for PB telephone and Voice Call); receive
service set tone for 3 seconds.
2. Record the message.
3. Restore the handset.