NEC NEAX 2000, Programming Manual

Page: 1107 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 325
Revision 1.0
(2/2)
SPEED CALLING-ONE TOUCH - D
term
(CONT’D)
SERVICE CONDITIONS (CONT’D)
c. Trunk access code (maximum 2 digits) + outside *# + DTMF signal after the called sta-
tion answered (maximum 26 digits in total except Trunk access code)
Note:
“*#” is programmed as a delimiter between outside number and DTMF signal.
This One Touch key is effective when the station user is in idle or seizing a trunk. When talking to
the outside party, the One Touch key sends only outside number as DTMF signal. When depress-
ing another One Touch key during sending DTMF signal after a called station answered, the stored
number in the second One Touch key is sent out as DTMF signal continuously. If the second One
Touch key stores the station or outside number with DTMF signal (the above “b”, “c”), only the
station/outside number is sent out and the DTMF signal is not sent out.
6. By dialing the feature access code of CALL FORWARDING - ALL CALLS/-BUSY LINE/-NO
ANSWER and depressing a One Touch key, CALL FORWARDING can be set to a stored station/out-
side number in the One Touch key. The station which CALL FORWARDING-OUTSIDE is restricted
can not use a One Touch key for CALL FORWARDING operation.
7. If a system provides an expansion memory card for SPEED CALLING - ONE TOUCH - D
term
and/or
SPEED CALLING - STATION, an additional 10,000 memory buffers can be used.
8. When using the additional 10,000 memory buffers for the D
term
s, the LEDs on the One Touch keys do
not show the busy state of the station associated with the keys.