NEC NEAX 2000, Programming Manual

Page: 633 / 1200

FEATURES FOR OTHER COUNTRIES ONLY
MFC-INCOMING CALL/MFC-OUTGOING CALL
– 613 –
A2594-10
(4) DOD with ANI Data Assignment
For providing ANI function, do the following programming in addition to the previous section.
DESCRIPTION DATA
Provide the DOD with ANI function. (1)
(2) 474
0: Available
NOTE 2
Select the Backward signal for ANI signal.
NOTE 1:
The 2nd data for CM08>477 and
CM08>487 must be same.
(1)
(2)
(1)
(2)
477
0/1
NOTE 1, 2
478
0/1
NOTE 1, 2
NOTE 2:
Refer to the “MFC Data As-
signment Table for Each
Country”.
page 615
Assign the calling party number (station
number) for ANI function.
NOTE:
The calling party number is sent
to PSTN as follows.
XXX········XXX + YYYY
Local office code Station No.
assigned by
assigned by
CM50 Y=05 CM12 Y=12
•
(1)
(2)
Y=12
X-XXXXXXXX: Station No.
X-XXXX: Calling party No. (Station No.)
Assign the Local Office Code Table num-
ber for ANI function.
•
(1)
(2)
Y=13
X-XXXXXXXX: Station No.
00-14: Local Office Code Table
No. 00-14
15 : No data
CM12
START
CM08
A
INITIAL
INITIAL