NEC NEAX 2000, Programming Manual

Page: 854 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 72
Revision 1.0
(1/1)
CALL FORWARDING - BUSY LINE -D
term
GENERAL DESCRIPTION
This service feature permits a call to a busy station to be immediately forwarded to a predesignated sta-
tion, or to the Attendant.
STATION APPLICATION
All D
term
s
OPERATING PROCEDURES
To set CALL FORWARDING - BUSY LINE:
1. Lift the handset or press
Speaker
key; receive Dial Tone.
2. Press the
CALL FORWARDING - BUSY LINE
key; receive Special Dial Tone.
3. Dial the desired target station number; receive Service Set Tone.
The LCD displays “
SET xxxx
” (where
xxxx
is Target Station)
The LED of the associated feature key lights.
4. Replace the handset or press
Speaker
key.
5. If the target station is the operator, the LCD displays “
SET OPR
” (
OPR
means Operator)
To cancel CALL FORWARDING - BUSY LINE:
1. Lift the handset or press
Speaker
key; receive Dial Tone.
2. Press the
CALL FORWARDING - BUSY LINE
key; receive Special Dial Tone.
3. Dial ‘
*
’; receive Service Set Tone. The LCD displays “
CANCEL
” and the associated LED goes
out.
4. Replace the handset or press
Speaker
key.
SERVICE CONDITIONS
1. Refer to CALL FORWARDING - BUSY LINE.