NEC NEAX 2000, Programming Manual

Page: 352 / 1200

– 332 –
A2325-10
MESSAGE REMINDER-D
term
MESSAGE REMINDER-D
term
PROGRAMMING
To provide Message Reminder service for each station:
DESCRIPTION DATA
Select MSG Display on D
term
. (1)
(2) 025
0 : MSG (only)
1 : MSGX (X: No. of messages)
To activate Single Digit Feature Access
Code (1, 2, 3 and 6) feature, set the data
for 050, 051, 069 and 148 to “1”.
NOTE:
A single digit access code “6” is
fixedly assigned to set Message
Reminder.
(1)
(2) 050: * Button as Switch Hook Flash
1
: Ineffective
(1)
(2) 051: # Button as Switch Hook Flash
1
: Ineffective
(1)
(2)
069: Single Digit Dialing on BT
Connection
1 : Step Call
(1)
(2)
148: Same Last Digit Redialing on BT
Connection
1 : Ineffective
Provide the system with Single Digit Fea-
ture Access Code on RBT or Voice Call
Connection. (1)
(2) 156
0: Available
Provide the system with Single Digit Fea-
ture Access Code on busy Connection. (1)
(2) 208
0: Available
Provide the system with the automatic
cancel of Message Reminder while the
called station rings. (1)
(2) 234
0 : Available
1 : Not available
Specify the Automatic Cancel of Message
Reminder when the desired station an-
swers. (1)
(2) 235
0 : Available
1 : Not available
Specify the sending of Special Dial Tone
for Attendant Console or station when dial-
ing a feature access code. (1)
(2) 236
0 : Tone is not sent
1 : Tone is sent
START
CM08
A