NEC NEAX 2000, Programming Manual

Page: 1185 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 403
Revision 1.0
(1/4)
VOICE MESSAGE SYSTEM
GENERAL DESCRIPTION
This feature provides the Voice Message Waiting service that an originating station user can set the
Message Waiting with a prerecorded message by using the Digital Announcement Trunk (DAT) card
• Voice Message Waiting - System
-
An originating station user can choose the prerecorded message to be set by dialing the
message number associated. The messages are recorded by the predetermined station.
• Voice Message Waiting - Individual
-
When setting Message Waiting, an originating station user announces the message to be
recorded after dialing the station number.
STATION APPLICATION
All stations
OPERATING PROCEDURE
Voice Message Waiting - System
To record:
1. Lift the handset and receive Dial Tone.
2. Dial the Voice Message Waiting - System record access code.
3. Dial the message number (0-9) and receive Service Set Tone for 3 seconds.
4. Record the message.
5. Restore the handset.
To check:
1. Lift the handset and receive Dial Tone.
2. Dial the Voice Message Waiting - System replay access code.
3. Dial the message number (0-9) and receive Service Set Tone for 3 seconds.
4. Listen to the message.
5. Restore the handset.
To set:
l. Lift the handset and receive Dial Tone.
2. Dial the Voice Messaging Waiting - System set access code.
3. Dial the message number (0-9) and receive Special Dial Tone.
4. Dial the desired station number and receive Special Dial Tone.
5. Repeat Step 4 for additional stations.
6. Restore the handset.
To cancel Voice Message Waiting - System to all stations:
l. Lift the handset and receive Dial Tone.
2. Dial the Voice Message Waiting - System all stations cancel access code.
3. Dial the message number (0-9) and receive Service Set Tone.
4. Restore the handset.