UNITIZED TRANSAXLE: 850 GASOLINE VEHICLE
Unitized Transaxle Removal
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
Page 19-7
19
4.3. Disconnect impulse line from fuel pump
(Figure 19-11, Page 19-7)
.
4.4. Loosen the hose clamp and then disconnect the fuel line from the carburetor. To prevent spilling
fuel, the disconnected end of the line can be plugged with a 1/4-inch bolt
(Figure 19-12,
Page 19-7)
.
4.5. Remove the cover from the electrical component box. Then loosen the hardware securing the
accelerator cable to the box. Disconnect the cable from the actuator cam and remove it from the
box
(Figure 19-13, Page 19-8)
.
4.6. Remove retaining nut and disconnect the engine ground wire from the oil filler tube mounting
bracket
(Figure 19-14, Page 19-8)
.
Figure 19-9 Fuel Vent Tube
Figure 19-10 Air Intake Hose
Figure 19-11 Impulse Line
Figure 19-12 Fuel Line
Summary of Contents for 2007 XRT 800
