ENGINE
Ignition Coil and Flywheel
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
Page 15-7
15
3. Hold the flywheel (4), not the fan (7), with a strap wrench (5) and, using a 25 mm socket, remove the fly-
wheel nut (and flat washer) by turning it counterclockwise
(Figure 15-9, Page 15-7)
.
See following
CAUTION.
ý
CAUTION
• The flywheel nut has right-hand threads. Turn it clockwise to tighten, or counterclockwise to
loosen.
• Do not damage the fan blades with the strap wrench. Do not place screwdriver or pry bar in
the fan blades.
4. Remove the flywheel with a puller (CCI P/N 1016627).
5. Remove the flywheel key from its groove.
Figure 15-7 Flywheel Housing
Figure 15-8 Ignition Coil
Figure 15-9 Flywheel Nut
Figure 15-10 Adjust Ignition Coil Air Gap
Loosen.
Remove.
Remove.
2
1
3
5
7
4
M
F
34
81
0.012"
(0.304 mm)
3
Summary of Contents for 2007 XRT 800
