![background image](http://html1.mh-extra.com/html/club-car/2007-xrt-800/2007-xrt-800_maintenance-service-manual_2626829337.webp)
UNITIZED TRANSAXLE: 850 GASOLINE VEHICLE
Unitized Transaxle Removal
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
Page 19-11
19
11. Position jack stands, adjusted to support the vehicle at this height, under the frame crossmember
between the leaf spring mounts and side stringers, just forward of each rear wheel. Lower the floor jack
to allow the jack stands to support the vehicle
(Figure 19-25, Page 19-11)
.
12. Pull the floor jack from beneath the vehicle and move it away.
13. Carefully lift the snubber out of the snubber bracket in the vehicle frame and lower it to the floor
(Figure 19-26,
Page 19-11)
. The powertrain should be completely disconnected from the vehicle and resting on the floor.
14. Grasp the ends of the leaf springs at the rear of the vehicle and roll the powertrain out from under the vehicle
(Figure 19-27, Page 19-11)
.
Figure 19-24 Raise Vehicle
Figure 19-25 Position Jack Stands On Both Sides of
Frame
Figure 19-26 Snubber and Bracket
Figure 19-27 Remove Powertrain
Summary of Contents for 2007 XRT 800
