BODY AND TRIM
Front Body – 850
Page 4-6
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
4
3. Remove screws (7) securing the standard brush guard to the vehicle.
4. Remove bolts (8), washers (9) and spacers (10) and pull the standard brush guard (2) from the vehicle.
BUMPER/BRUSH GUARD (STANDARD) INSTALLATION
1. Position the standard brush guard (2) on vehicle and loosely install spacers (10), washers (9), bolts (8)
and screws (7)
(Figure 4-4, Page 4-6)
.
See preceding WARNING.
2. Position the standard bumper (1) against body and front frame and loosely install top bolts (4) and lock
nuts (5).
3. Install bottom screws (6) and tighten to 14 ft-lb (19 N·m).
4. Tighten lock nuts (5) to 17.5 ft-lb (24 N·m).
Figure 4-4 Standard Bumper and Brush Guard – 850 (Heavy Duty Shown in Inset)
3
2
4
6
1
9
8
5
10
7
Summary of Contents for 2007 XRT 800
