![background image](http://html1.mh-extra.com/html/club-car/2007-xrt-800/2007-xrt-800_maintenance-service-manual_2626829314.webp)
UNITIZED TRANSAXLE: 800/810 GASOLINE VEHICLES
Unitized Transaxle Removal
Page 18-10
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
18
6. Remove the lower shock mounting hardware from both rear shocks
(Figure 18-20, Page 18-10)
.
7. Position a floor jack under the vehicle frame crossmember or trailer hitch mount
(Figure 18-21,
Page 18-10)
.
8. Raise vehicle just enough to relieve tension from leaf springs, then remove the bolts securing the leaf
springs to the shackles
(Figure 18-22, Page 18-10)
.
9. Remove the bolts securing the leaf springs to their front mounts
(Figure 18-23, Page 18-10)
.
10. Continue raising vehicle until frame or trailer hitch is higher than the top of the unitized transmission
(enough to allow transaxle and engine to be rolled under and out of vehicle)
(Figure 18-24, Page 18-11)
.
Figure 18-20 Shock Absorbers
Figure 18-21 Floor Jack
Figure 18-22 Rear Shackles
Figure 18-23 Spring Retainer Bolts
Position floor jack under
hitch bracket and frame.
Remove bolts, then
rotate shackles
up and away
from spring.
Summary of Contents for 2007 XRT 800
