GENERAL INFORMATION
Storage – Gasoline Vehicle
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
Page 3-3
3
3. Disconnect the battery cables, negative (–) cable first.
See WARNING “To avoid unintentionally start-
ing...” in General Warning on page 1-2.
4. Batteries should be clean and free of corrosion. Wash tops and terminals of batteries with a solution of
baking soda and water (237 mL (1 cup) baking soda per 3.8 L (1 gallon) of water). Rinse solution off bat-
teries. Do not allow this solution to enter the batteries. Be sure terminals are tight. Let the terminals dry
and then coat them with Battery Terminal Protector Spray.
5. To protect the engine, remove spark plug and pour 14.2 mL (1/2 oz.) of SAE 10 weight oil into the engine
through the spark plug hole. Rotate engine crankshaft by hand several times, then install the spark plug
and tighten to 27 N·m (20 ft-lb).
6. Adjust tires to recommended tire pressure.
See Section 2 – Vehicle Specifications.
7. Perform semiannual periodic lubrication.
See Periodic Lubrication Schedules on page 10-4.
8. Thoroughly clean front body, rear body, seats, engine compartment, and underside of vehicle.
9. Do not engage the park brake. Chock the wheels to prevent the vehicle from rolling.
Figure 3-2 Fuel Tank, Vent, and Lines
1. Vent 2. Shut-off Valve 3. Vent Tubes
1
3
2
Summary of Contents for 2007 XRT 800
