ELECTRICAL COMPONENTS: 800 AND 810 GASOLINE VEHICLES
Oil Level Sensor
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
Page 13-27
13
OIL LEVEL SENSOR
See General Warning on page 1-1.
Testing the Oil Level Sensor
See Test Procedure 21, Section 11, Page 11-30.
Oil Level Sensor Removal
See Oil Level Sensor Removal on page 15-5.
Oil Level Sensor Installation
See Oil Level Sensor Installation on page 15-5.
HEADLIGHTS
See General Warning on page 1-1.
Testing the Headlight Socket
See Test Procedure 30, Section 11, Page 11-37.
Headlight Bulb Removal
1. Turn the key switch OFF and remove the key. Place the Forward/Reverse handle in the NEUTRAL posi-
tion. Chock the wheels.
2. Disconnect the battery cables as instructed.
See WARNING “To avoid unintentionally starting...” in
General Warning on page 1-2.
3. From the front of vehicle, reach under body and turn the wire harness/halogen bulb assembly (4 and 6)
clockwise one-quarter turn
(Figure 13-28, Page 13-27)
.
4. Remove the wire harness/halogen bulb assembly (4 and 6) from the headlight lens (7).
5. Lift the retaining tabs on the connector (4) and remove halogen bulb assembly (6).
Figure 13-28 Headlight Assembly
7
6
4
Summary of Contents for 2007 XRT 800
