UNITIZED TRANSAXLE: 800/810 GASOLINE VEHICLES
Unitized Transaxle Removal
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
Page 18-7
18
4.3. Disconnect impulse line from fuel pump
(Figure 18-11, Page 18-7)
.
4.4. Loosen the hose clamp and then disconnect the fuel line from the carburetor. To prevent spilling
fuel, the disconnected end of the line can be plugged with a 1/4-inch bolt
(Figure 18-12,
Page 18-7)
.
4.5. Remove the cover from the electrical component box. Then loosen the hardware securing the
accelerator cable to the box. Disconnect the cable from the actuator cam and remove it from the
box
(Figure 18-13, Page 18-8)
.
4.6. Remove retaining nut and disconnect the engine ground wire from the oil filler tube mounting
bracket
(Figure 18-14, Page 18-8)
.
Figure 18-9 Fuel Vent Tube
Figure 18-10 Air Intake Hose
Figure 18-11 Impulse Line
Figure 18-12 Fuel Line
VENT TUBE
IMPULSE LINE
FUEL LINE
Summary of Contents for 2007 XRT 800
