Club Car 2007 XRT 800, Maintenance Service Manual, Page: 69 / 516

ACCELERATOR AND BRAKE PEDAL GROUP Pedal Group Adjustment – Electric Vehicles
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual Page 5-19
5
5. Adjust accelerator pedal height.
5.1. Loosen the nut and bolt (Figure 5-28, Page 5-19) securing the accelerator pedal to the pivot plate.
5.2. Clamp the accelerator pedal adjustment tool (CCI P/N 101871001) to the accelerator pedal, with
the end marked accelerator pedal height closest to the floorboard (Figure 5-29, Page 5-19) . Press
the accelerator pedal until the end of the tool rests against the floorboard; pedal height should be
5-5/8 inches (14.3 cm). Use a rubber strap to hold pedal in position against the floorboard and then
tighten nut to 26 ft-lb (35.3 N·m).
6. Adjust the brakes. See Brake Adjustment, Section 6, Page 6-8.
Figure 5-27 Brake Rod Adjustment Figure 5-28 Accelerator Pedal Height Adjustment
Figure 5-29 Accelerator Pedal Height Adjustment
ST
OP
PARK
GO
ACCELERATOR PEDAL
ADJUSTMENT TOOL
(CCI P/N 101871001)
RUBBER STRAP
GO
ST
OP
PARK
MICRO BR
EAK POINT
MICRO BRE
AK POINT