UNITIZED TRANSAXLE: 800/810 GASOLINE VEHICLES
Unitized Transaxle Installation
Page 18-18
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
18
27. Connect the impulse line to the fuel pump and secure it with the hose clamp
(Figure 18-50, Page 18-18)
.
28. Connect air intake hose to carburetor and secure hose clamp
(Figure 18-51, Page 18-18)
.
29. Connect carburetor vent tube to carburetor and secure with hose clamp
(Figure 18-52, Page 18-18).
30. Install transaxle drain plug and tighten to 21 ft-lb (28.5 N·m).
31. Fill transaxle with 27 oz. (0.8 liter) 80-90 Wt. API class GL-3 or 80-90 WT. AGMA class EP gear lube.
Install and tighten the level indicator hole plug to 21 ft-lb (28.5 N·m).
32. Ensure that all wiring is secured properly.
See following WARNING
.
Figure 18-50 Impulse Line
Figure 18-51 Air Intake Hose
Figure 18-52 Carburetor Tube
Summary of Contents for 2007 XRT 800
