![background image](http://html1.mh-extra.com/html/club-car/2007-xrt-800/2007-xrt-800_maintenance-service-manual_2626829043.webp)
BODY AND TRIM
Rear Body and Fenders – 800 and 810
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
Page 4-13
4
Electric vehicles:
5. Disconnect or remove charger receptacle:
5.1. Remove wire ties binding 10-gauge red wire (from charger receptacle to battery) to the vehicle
frame. Disconnect the 10-gauge red wire at the positive post of battery no. 1.
5.2. Remove the retaining nut and disconnect the 10-gauge black wire (from the onboard computer)
from the receptacle.
5.3. Unplug the fuse holder assembly to disconnect the gray sense lead from the receptacle.
6. If the Forward/Reverse switch is mounted on the rear body, disconnect and remove Forward/Reverse
switch.
See Forward/Reverse Switch Removal on page 23-4.
Gasoline Vehicles:
NOTE:
To remove the rear body, the choke button assembly does not have to be removed from the body.
However, adjustment of the choke positioner may be necessary after the rear body is reinstalled.
7. If the Forward/Reverse shifter is mounted on the rear body, remove Forward/Reverse shifter.
8. Remove two bolts, washers and nylon lock nuts from rear fenders at frame locations
(Figure 4-17,
Page 4-14)
.
9. Lift rear body and fenders from the vehicle.
Figure 4-15 Remove Kick-Plate Screws
Figure 4-16 Charger Receptacle
GRAY SENSE LEAD
WITH FUSE
GRAY WIRE
FROM OBC
10-GAUGE BLACK
WIRE TO OBC
10-GAUGE
RED WIRE
TO BATTERY
CHARGER
RECEPTACLE
Summary of Contents for 2007 XRT 800
