background image

4KB-28199-1C

LIT-11626-15-07

READ THIS MANUAL CAREFULLY!

It contains important safety information.

This ATV should not be ridden by anyone under 16 years of age.

WARNING

PRINTED IN JAPAN
2001

 

·

 

4

 

-

 

1.3 

×

 

3

 

CR

(E)

PRINTED ON RECYCLED PAPER

WARNING

ALWAYS

:

• use proper riding techniques to avoid 
  vehicle overturns on hills and rough terrain 
  and in turns.
• avoid paved surfaces-pavement may 
  seriously affect handling and control.

Improper ATV use can result in SEVERE INJURY or DEATH.

NEVER USE 

WITH DRUGS 
OR ALCOHOL

ALWAYS USE 

AN APPROVED 

HELMET AND 

PROTECTIVE GEAR

NEVER USE 

ON PUBLIC 

ROADS

NEVER CARRY 

PASSENGERS

NEVER

 operate:

• without proper training or instruction.
• at speeds too fast for your skills or 
  the conditions.
• on public roads-a collision can occur with 
  another vehicle.
• with a passenger-passengers affect balance 
  and steering and increase risk 
  of losing control.

LOCATE AND READ OWNER'S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS.

(For replacement manual, call 1-800-532-1558)

YAMAHA MOTOR CO., LTD.

YFM350FXP(C)

OWNER’S MANUAL

Summary of Contents for WOLVERINE YFM350FXP








































































































































































Reviews: