Zeiss LSM 880, Operating Manual

Page: 491 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Center Screen Area / Image Containers - Display and Image Analysis ZEISS
10/2014 V_01 000000-2071-464 485
Buttons for diagram display options:
Mode
pull down: choose between area and mean mode
Area: Display of the area of the ROI in the intensity time diagram,
depending on the set threshold values. Area measurements of very
small areas (< 10 pixels) give only approximate values.
Mean:
Display of the mean values of the relevant ROI in the intensity
time diagram.
Diagram line width pull down: sets the line with of the curves in the
diagram.
Diagram graph style pull down : choose from a set of graph styles
Show Table tick box: The table of intensity values is displayed on the
bottom of the Image Display window.
Time unit pull down: choose between seconds, minutes, hours or
Automatic
Time Range
check box and spin box: reduce the displayed time range
to the selected value
In Area Mode: Ch1 / Ch3 / Ch4 pull down: Selection of the channel to
be used.
In Area Mode: Threshold low and high
slider: The intensity values
below /above threshold are not displayed for the Area function.