Zeiss LSM 880, Operating Manual

Page: 284 / 690

CHAPTER 1 - SYSTEM OPERATION
ZEISS Left Tool Area and Hardware Control Tools LSM 880
278 000000-2071-464 10/2014 V_01
•
Choosing
Abscissa logarithmic
or
Ordinate logarithmic
will display the abscissa or ordinate in a
logarithmic scaling.
•
The
line width
allows you to select the thickness of the graph. 6 settings are possible.
With the ordinate set to a logarithmic scale all zero frequencies will be displayed as vertical tabs,
since the log0 goes to infinity low values.
5.3.21.6 Saving Correlation Results
You can save correlation data in the File menu of
the menu bar.
(1) Save and Save as
•
Save will save the data in .fcs format and will
overwrite an older version. This function is also
available in the
Images and Documents
column (Fig. 371) by pressing the disc button.
•
Save as allows you to save the whole data set
(curves, fitting results, fit parameters, raw data)
to a disk. If
Save as
is pressed you will have the
choice between FCS data files (.fcs) without
raw data or
FCS files with raw data (.fcs)
attached by selecting the appropriate settings
from the pull-down menu (Fig. 372).
Note that raw data are only available, if the
FCS files with raw data was selected.
The Save FCS menu offers the possibility of
entering a file name in the
Name
field and to
choose an appropriate Directory .
Note that it is only possible to store the data
as ANSI text. Binary file formats of previous
releases are no longer available.
If raw data were saved along with the FCS file, the raw data of each single measurement channel
will be stored attached to the .fcs file. .raw files will bear the same name than the .fcs file with
name extensions, which identify the repetition and the channels.
You can enter a sample comment in the Sample Comment display box by typing. This comment
will be saved along with the data.
Fig. 371 Open images column
Fig. 372 Save Raw Data window