Zeiss LSM 880, Operating Manual

Page: 200 / 690

CHAPTER 1 - SYSTEM OPERATION
ZEISS Left Tool Area and Hardware Control Tools LSM 880
194 000000-2071-464 10/2014 V_01
5.3.4.1 Defining a New Model
If the Define button is pressed, the Define Model
panel will open. It is used to define model
equations to which measured data can be fitted.
•
Click on the Define button tab to open the
Define Model
panel (Fig. 274). Click the tab
again to close the panel.
You have three options to define a model:
−
Correlation : assemble a correlation model
from predefined equations, which will be
fitted analytically
−
PCH : assemble a photon counting histogram
model, which will be fitted numerically
−
Formula : program a user defined model
equation, which can be fitted analytically.
For user defined models the options "free"
and "globally link" are not available in the
fit.
•
Press Ok to save the current settings as a
default.
•
Press Cancel to leave the panel without setting
the changes as a default.
Fig. 274 Define Model panel