Zeiss LSM 880 Operating Manual Download

Page: 453 / 690

CHAPTER 1 - SYSTEM OPERATION

LSM 880

Center Screen Area / Image Containers - Display and Image Analysis

ZEISS

10/2014 V_01

000000-2071-464

447

6.8

2.5 D View

This function allows to

−

display the two-dimensional intensity distribution of an image in an pseudo 3D mode,

−

show the intensity values in profile, grid or filled mode,

−

show separate distribution for each channel in a multi-channel image.

The

2.5 D

button can also be used online during scanning.

The settings of the

Dimensions

View Options control blocks apply. The settings of

Display

Player

and

Graphics

View Options control blocks do not apply.

Any changes done with this toolbar are effective immediately. The content of the overlay plane is

temporarily hidden while the toolbar is displayed.
The image display in the

2.5 D View Type

is the same as in the

View Type. For a description of the

controls in the display window see section

3D Rendering Settings in VisArtplus

In brief, the viewing plane of the

Image Display

window can be rotated, tilted either directly with the

mouse or by the scroll bars on the right-hand side and the bottom of the

Image Display

window.

Fig. 632

2.5 D View Option control tabs

Summary of Contents for LSM 880



















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 880

Reviews:

Related manuals for LSM 880

Brands by name

Popular brands

Zeiss LSM 880, Operating Manual

Search results

Summary of Contents for LSM 880

Reviews:

Related manuals for LSM 880

Brands by name

Popular brands