Zeiss LSM 880, Operating Manual

Page: 269 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Left Tool Area and Hardware Control Tools ZEISS
10/2014 V_01 000000-2071-464 263
5.3.21.1 Start and End of a Measurement
Fig. 351 FCS Correlation window during data acquisition
After setting the parameters the measurement can be run.
•
Click on the
Snap
or
Start Experiment
action button to start the measurement and data analysis
process. If Snap was chosen, exactly one measurement at the first Carrier or highlighted LSM Image
(Fig. 351) position will be performed. If
Start
was selected, measurements will be performed on all
selected positions in a sequence.
Status lines at the bottom of the data evaluation window and in the Open Image display area
show the progress of a current measuring procedure online. For non saved modified data a
warning sign (orange triangle) will be displayed in
Open Images (Fig. 358).
•
Click on the
Stop
button to end the measurement. Only complete measurements will be available for
storage; the interrupted measurement will be lost.
•
Save the data in the
File
menu.