Zeiss LSM 880, Operating Manual, Page: 47 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Introduction to the Software Application Layout ZEISS
10/2014 V_01 000000-2071-464 41
4.8 Left Tool Area
Main Tool tabs
Switches between the
Locate
,
Acquisition
,
Processing and Maintain main tools to
operate the included tool
Action buttons
Action buttons are only available for the
Acquisition Main
tool to control the image
acquisition process.
Tool groups
Groups special tools, e.g. Setup Manager
or
Acquisition Parameter
.
Setup Manager
The tools of this tool group (Laser and Setup
Imager) are only visible if the check box
Show all Tools is checked. Those tools are
necessary if the system should be operated
in full manual mode. The use of the
automated functions of ZEN like smart setup
includes the functions of those tools.
The tools
Laser
and
Setup Imager
are not displayed by default in the
software. They can be shown if the
check box
Show all Tools is
checked.
Acquisition Parameter
Tools continuously needed for all acquisition
procedures.
F
ig. 30 Left tool area
F
ig. 31 Expand slider with arrow button pointing
left to collapse and right to expand