Zeiss LSM 880, Operating Manual

Page: 411 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Left Tool Area and Hardware Control Tools ZEISS
10/2014 V_01 000000-2071-464 405
5.5.2.4 Remove Objective
This function allows removing objectives from the
User
Defined Objective database (Fig. 567).
Expand the
User Defined Objective
directory and
highlight the objective you want to delete.
Press the
Remove Objective
button in order to
delete the selected objective. Note that the Remove
Objective button only becomes available, if an
objective from the user Defined Objectives directory
was chosen. You will be prompted to confirm to
delete the objective in the
Delete Objective
pop up
window (Fig. 568). Press Yes to delete the objective
from, No to keep it in the database or Cancel to
abort the process.
5.5.2.5 Show/Edit Objective
This function allows viewing the parameters of an
objective from all objective directories. Editing the
parameters is only possible for the
User Defined
Objective database (Fig. 569).
Expand the
Favorite Objective
,
User Defined
Objective or Potential Objective directory and
highlight the objective you want to view. This will
open the View tab.
In case of an objective listed in
User Defined
Objective
directory, parameters can be edited within
the display boxes (those parameters not to be edited
will be greyed) or the drop down menus. Press the
Apply Edit
button (only available for user defined
Objectives) to make the changes take effect and store
the new annotations.
Fig. 567 Remove objective
Fig. 568 Delete objective window
Fig. 569 Show/Edit objective