Zeiss LSM 880, Operating Manual

Page: 58 / 690

CHAPTER 1 - SYSTEM OPERATION
ZEISS Left Tool Area and Hardware Control Tools LSM 880
52 000000-2071-464 10/2014 V_01
To delete a configuration press the
Delete
button
( ). This opens the Delete configuration panel
(Fig. 43).
Select the ocular configuration from the
Configurations
list by highlighting it or search for
it by typing its name in the Search field. The
Delete Configuration pop up menu will appear
(Fig. 44). Press
Yes
to delete the configuration,
No
to keep the configuration or Cancel to close the
dialog.
To save a microscope configuration press the
Save
button ( ). This opens the Save current ocular
configuration as
panel (Fig. 45). Type in an
appropriate name in the Configuration field and
press
Ok
to save the microscope configuration in
the data base or press Cancel to abort the process.
The configuration that is saved is the one as
defined in the
Microscope Control panel.
If you press the
Assign
button, the
Assign
pop up
menu will appear (Fig. 46). You can select the
button to which a configuration should be
assigned in the
Button
selection drop down menu
– up to 8 buttons are available. The configuration
that should be assigned to a button can be
selected from the
Configuration selection drop
down menu. By pressing Assign the configuration
will be assigned to the button that will be
displayed right to the
Assign
button. The buttons
will carry the name of the selected configurations
and appear from left to right and top to down
according to their number. The ocular
configuration assigned to that button will be
automatically loaded by pressing that button. If
you want to delete a predefined button, select the
button (and its configuration), and press
Delete .
The
Microscope Control
and
Incubation
tools
are available in the Locate tab (Fig. 41). By
pressing the expansion symbols in the bars the
Microscope Control and Incubation tools
become available. The
Microscope Control
tool
permits configuring beam paths, which can be
saved and reloaded in the
Configuration field.
Motorized functions controlled from the
Microscope Control tool include objective,
reflector cube and illumination mode (transmitted
or reflected light) selection. The
Incubation
tool
allows setting the temperature, CO
2
level, O
2
level
and humidity.
Fig. 43 Delete Configuration panel
Fig. 44 Delete Configuration pop up menu
Fig. 45 Save current configuration as panel
Fig. 46 Assign Pop up menu