Zeiss LSM 880, Operating Manual

Page: 266 / 690

CHAPTER 1 - SYSTEM OPERATION
ZEISS Left Tool Area and Hardware Control Tools LSM 880
260 000000-2071-464 10/2014 V_01
5.3.21 Taking FCS Measurements
•
Click on the New document button to open a new FCS Diagram in an Image Container . New
diagrams per session will be numbered starting with 0 (Fig. 347).
•
Click the Close button (cross symbol) in the tab to close the FCS Diagram . The Close Image window
will appear and prompt you to acknowledge closing the diagram if anything on the data was altered.
Press
Yes
to save any changes,
No
to discard the alterations and
Cancel
to return to the diagram
(Fig. 347).
•
A scrollbar at the bottom of the window will allow you to view all data in case the content does not fit
the window size.
Fig. 347 Image Container with new FCS Diagram opened
The arrow in the container can be used to expand or shrink the display in the vertical direction. The Open
Image container on the right displays all currently open files. Its arrow can be used to expand or shrink
the FCS diagram window horizontally.
If one of the
Option tabs below the diagram are pressed, the corresponding options will be displayed.
For the FCS diagram the Correlation and Table tabs (Fig. 348 and Fig. 349) are available.