Zeiss LSM 880, Operating Manual

Page: 487 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Center Screen Area / Image Containers - Display and Image Analysis ZEISS
10/2014 V_01 000000-2071-464 481
Graphical elements list
List Columns Description
Eye symbol Shows or hides the ROI / POI in the image.
Lock symbol Locks a ROI / POI to prevent changes.
Type Displays the icon for the tool type (ROI/POI).
ID Displays the ID for the graphic element. To do this, activate the
checkbox at the corresponding list entry.
M Displays measurement data for a graphic element. To do this, activate
the checkbox at the corresponding list entry.
Name Displays the name of the graphic element. To change the name,
double-click in the Name field. Then enter the text of your choice.
Correlating a live image and a snapped image
The snapped image and the regions of interest drawn in the image can be relocated after the stage has
been moved.
−
Open a second container in the view tab
−
Click on the Continuous button to start continuous scanning.
−
Load the previously acquired image and click either on Center in the Find tool bar to center the live
image or click on the ROI/POI within the Find tool bar to center the activated ROI or POI in the live
image.
Defined regions of interest and points of interest can only be relocated within one imaging
session. In case the software was restarted, the positions of the image and the defined regions
and points are no longer valid.