ZEISS
Left Tool Area and Hardware Control Tools
LSM 880
250
000000-2071-464
10/2014 V_01
5.3.14
Method Tool
The
Method
tool allows to store (
floppy disc
button), load (
open file
button) and to delete
(
cross
button) methods.
(1)
Storing a method
The
Store
button (
floppy disc
symbol) will allow you to save all settings (
Light Path
,
Acquisition
,
Correlator
) into a method.
•
Click on the
Store
to open the
Save Method
panel (Fig. 334). Click again to close the panel.
•
You can save the method by pressing the
Ok
button. If the method name exists already, the system
will prompt you to confirm overwriting the old method. Press
Yes
to overwrite,
No
to keep the old
method settings. If the system settings deviating from default expectations, it will give a warning. For
example, if no pinhole alignment was done or if a dual color experiment was set up with one channel
or one laser, a corresponding warning will be displayed. Press
Yes
for continuing anyway,
No
for
returning to the method without saving. If you press
Cancel
, the
Save Method
windows will close
without saving the method.
•
You can enter a new method name or replace the old one by typing into the
Name
display window
You can enter a category name or replace an old one by typing into
Category
display box.
•
You can give a comment or replace an old one by typing it into the
Comment
display box.
Fig. 334
Save Method panel
Summary of Contents for LSM 880
