USB Portable Microscope
USER MANUAL
Introduction
MICR-USB01 is a newly developed portable microscope with autofocus. It is very easy to carry and operate, when it is connected to the computer via
USB2.0, the image will be shown on the computer. MIKR-USB01 has auto focusing within a view distance, which enables it to capture image more easily
than that of manual focusing.
Feature
Small size, portable, easy to operate.
Image would be shown on the computer to which when MIKR-USB01 is connected via USB2.0
With autofocus
Stepless magnification adjustment
Stepless lighting adjustment
Applications
Checking electronic components, PCB board, precise machine, observing stamp, coins, curios, ornaments, biology, insect, plants, fiber, etc.
Parameters
Image Sensor: 1/4″ high quality CMOS image sensor
Resolution
：
640 X 480
Color
：
true color 24bit(RGB)
Interface
：
USB2.0
Frame Rate
：
30
Frame
/Sec
Magnification: x40 max. (at working distance10mm, resolution 640x480)
Backlight: 4 pcs LED
Diameter microscope: 12 mm
Length microscope: 125 mm
Length cable: 1300 mm
Weight: 295 g
Computer System Requirement
To get high quality image, below requirement is recommended:
Pentium III
or above processor
128M or above RAM Memory
3D display card 64M RAM above, 32bit color display supported
USB 2.0 interface
Windows
Usage:
Connect the microscope to the computer via USB2.0
WINDOWS XP:
Open Menu START
Open My Computer
Open USB Video Device
Now you can see on the screen image from microscope.
WINDOWS 8
Open Menu START
Open Camera aplication
Now you can see on the screen image from microscope
You can adjust microscope magnification (switch on the body) and lighting (switch on the cable).
Cautions:
1.
Please read through the below cautions before use and follow them to avoid damage or injury:
2.
Make sure the computer is of good grounding, if not sure; please have it checked by a professional person.
3.
Don’t use the unit in the thunder storm weather.
4.
Please disconnect the unit with the computer after use and never leave it working under non-custody.
5.
Don’t have this unit contacted with steam, water, or other liquid, otherwise permanent damage maybe cause to the unit.
6.
The unit is with precise components, gentle and sight operation is mandatory, otherwise permanent damage maybe cause to the unit.
7.
Never disassemble the unit, otherwise permanent damage maybe cause to the unit.
8.
When using, the temperature of the handle/main body may rise and thus touch warm, it is normal. If it is hot, please disconnected it and
consult the dealer.
9.
This unit is not a toy for children, please put and store it beyond children’s reach.
10.
When not using, please put it in a well sealed box to avoid damp or damage.
