R&S 1332.4500K22, User Manual

Page: 515 / 1709

GUI reference
R&S
®
ZNA
515 User Manual 1178.6462.02 ─ 20
5.11 Cal softtool
The "Cal" softtool provides all functions related to system error calibration, scalar
power calibration, and "SMARTerCal".
Access: Channel – [Cal]
5.11.1 Start Cal tab
The "Start Cal" tab provides access to all functions for automatic or manual calibration.
Calibration of the R&S
ZNA is a fully guided process.
Background information
Refer to the following sections:
●
Chapter 4.5, "Calibration" , on page 158
●
Chapter 4.5.5, "Automatic calibration" , on page 179
●
Chapter 4.5.6, "Scalar power calibration" , on page 191
●
Chapter 4.5.7, "SMARTerCal" , on page 197
●
Chapter 4.1.6, "Data flow" , on page 93
5.11.1.1 Measurement modes and default calibration setup
When you open the Calibration wizard , the Calibration setup dialog , or the Calibrate All
dialog for the first time, the analyzer determines the preferred calibration setup based
on:
●
the channel's (or channels') measurement mode (or modes)
●
the channel's traces
●
whether a power meter is connected
The channel's (or channels') calibration setup is either written to the recall set automat-
ically, or you are asked to select between several reasonable setups (non-"Quick Start"
actions only).
Cal softtool