GUI reference
R&S
®
ZNA
596
User Manual 1178.6462.02 ─ 20
Save Verification Data
Export Data to METAS VNA Tools
. The exported ZIP file now also contains
the METAS verification configuration, and the verification measurement data obtained
so far.
5.11.5.4
METAS Reconnection dialog
While a METAS calibration is active, you can notify the METAS VNA Tools about addi-
tional reconnections and/or cable movements. The latter is only applicable if cables
were configured during the setup of the METAS calibration.
Access:
main toolbar icon or
Channel – [Cal] > "METAS Cal" > "METAS Reconnection"
Both reconnections and cable movements contribute to the overall measurement
uncertainty. In the METAS VNA Tools project created during the
these events are registered in the so-called measurement journal. In addition, the
results measured immediately after the event report are persisted in the project.
Cal softtool
