Command reference
R&S
®
ZNA
1554
User Manual 1178.6462.02 ─ 20
DIAGnostic:HUMS:STORage?
This command returns the storage information of the instrument. Depending on the set
data format, the queried data is either displayed in
XML
or
JSON
format. For more infor-
mation about setting the data format, see
Return values:
<StorageInfo>
<block_data>
Returns storage information for each storage device of the con-
nected instrument as block data.
#blockdata[{storagedevice1},
{storagedevice2},...]
Binary block data with the following syntax:
#<Digits><Length><Binarydata>
#
Indicates the start of the binary block
<Digits>
Decimal value
Gives the number of decimal digits used for the
<Length>
value
<Length>
Decimal value
Number of bytes the follow in the
<Binary data>
part
<Binary data>
Binary data in ASCII format
For each storage device it returns:
<diskname>,<temperature>,<type>,<modelfamily>,
<model>,<serialnumber>,<id>,<firmwareversion>,
<capacity>,<sectorsize>,<rotationrate>,<formfactor>,
<ataversion>,<sataversion>,<smartdatatable>.
For each value of the smart data table it returns:
<id>,<attributename>,<dataflag>,<value>,
<worst>,<threshold>,<type>,<update>,
<whenfailed>,<rawvalue>
HUMS and service date commands
